Ali Asghar, SR CIVIL ENGINEER( QAQC MANAGER)

Ali Asghar

SR CIVIL ENGINEER( QAQC MANAGER)

NPCC

Location
Saudi Arabia - Riyadh
Education
Master's degree, MSC CIVIL ENGINEERING
Experience
18 years, 6 Months

Share My Profile

Block User


Work Experience

Total years of experience :18 years, 6 Months

SR CIVIL ENGINEER( QAQC MANAGER) at NPCC
  • Saudi Arabia - Eastern Province
  • My current job since March 2019

•Tendering and preparation of BOQ and DNIT.
•Technical verification and approval of design of buildings.
•Preparation of IPCs and measurement book. (MB).
•Perform quality assurance and control activities by providing quality control guidelines to the department.
•Procurement of material including heavy equipment’s and machinery for the projects.
•Negotiation with suppliers and issuance of work orders.
•Coordination with site team and suppliers for the smooth functioning of project to achieve targets.
•Preparation of Comparison sheet and making knowing the specifications of material required.

QAQC CIVIL ENGINEER at ALFANAR CONSTRUCTION
  • Saudi Arabia - Hofof
  • December 2016 to December 2018

 Familiar with Saudi Aramco standard and Procedure and coordinate with site QC Inspectors in order to ensure that Quality requirements are followed.
 Ensure the project execution activity are comply with client requirement and international/nation standard at different project sites
 Prepare the Two Weeks Look Ahead Inspection Schedule for the Inspection activities and submit to QC Manager for Review and Further Process.
 Arrange orientation programs frequently to the QC inspectors and construction team about the quality and inspection requirements and updates if any
 Arrange material receiving inspection in coordination with QC Inspectors, Inspectors, Procurement Supervisor and storekeeper, etc.
 To Coordinate with SAPMT, SAPID and the construction Team of our company through weekly meetings for the continuous improvement of the quality of work
 Raise Pro-active and NCR against the received materials and construction when construction activities and received materials are not following the PQP and Project Technical Specification /Approved IFC Drawing.
 Co-ordinate and follow up with construction team /technical team to close the internal pro-active and NCR against received materials and construction activities at site.
 Prepare Site QA/QC Weekly Report and RFI Dashboard, PQI, NCR Log, Proactive Status, Lesson Learned Report of Project and submit to QC Manager & PM
 Develop and maintain criteria for the traceability of inspections points to ensure that all the points are properly inspected and verified
 Conduct site Surveillance for ongoing activities with concern QC Inspectors and Support them for Inspection activities at Project Site

PROJECT ENGINEER at 2016 DAR ENGINEERING
  • Saudi Arabia - Jouf
  • May 2015 to December 2015

 Familiar with Saudi Electricity standard, Procedures and Project Quality Requirements
 Review and Implement project specifications, drawings and Quality Control plans & procedures
 Conduct field inspections and producing inspection reports for various construction activities
 Ensure that all sites activities are carried out according to approved IFC Drawing, Approved MOS and Project Technical Specification
 Concrete works- pre-pour inspections of formwork, reinforcing steel, and concrete placement
 Check the completeness and conformity to specified applicable requirements, standards
 Prepare and Raise the RFIs for the completed activities and received materials at Project Site
 Overall supervision of the ongoing activities and produce Pro-Active Notification and NCR
 Ensure the project execution activity are comply with client requirement and international and nation standard at project site
 Recording and managing systematically the nonconformity reports issued on site, checking that the settlement of non-conformities is in compliance with the acceptability criteria and the schedule is in accordance with the site requirements
 coordinate with third party inspection agencies for Concrete Test, FDT Test and calibration of instruments and machines at Project site
 Familiar and Implement the International Standards such as ACI and ASTM, AASTHO at Project
 Monitor and Inspect the Curing activities with compliance with Project Quality Requirements
 Ensure that Building Finishing activities are carried out as per approved MOS & Quality Requirements

Procurement Engineer at 2015. ALFANAR CONSTRUCTION
  • Saudi Arabia - Riyadh
  • October 2013 to May 2015

•Induction of vendor in the system with their evaluation.
•Invitation of quotation and inquiries to suppliers with evaluation of offers.
•Preparation of comparison sheets and negotiations with suppliers to make the price as per budget.
•Technical specifications of the material to be procured and finding the project requirement.
•Preparation of justification for the POs issued to higher price suppliers.
•Preparing the purchase orders as per purchase requests and playing coordination role between the Project team and suppliers.
•Evaluation of performance of suppliers and categorizing them as per their performance.
•Maintaining the records of issued purchase orders.
•Handling the Requests for inspection with suppliers and making bridge between supplier and project team.
•Responsible for advance payments made to suppliers as per agreement.
•Evaluation of Purchase Requests generated by Project Team.
•Meeting with suppliers for negotiations and cost effective price.
•Responsible for the verification of invoices and payment to suppliers.
•Revision of purchase orders as per purchase requests.
•Procurement of raw material from national and international market.
•Development of alternative local sources for imported raw materials which helps in cost saving.
•Purchasing machines with improved technology to increase production.
•Developing reports on procurement and usage of material for top management.
•Effective management of vendor database.
•Development of new vendors.
•Evaluating vendors & negotiating the price, delivery schedule and terms and conditions with them.
•Timely clearance of payments & handling vendor inquiries.
•High levels of integrity & professionalism in transactions & conduct with suppliers.
•Responsible for Preparation & Execution of purchase order and sending the same to suppliers & sub-contractors.
•Collecting quotations from various vendors and negotiating the prices and other terms & conditions.
•Follow up the material vigorously with the suppliers to ensure the dispatch on time for production.
•Interaction with, Finance& Accounts Dept. release the payment to the vendors as per supply terms.
•In case if any rejection materials from stores interaction with quality control dept. get the report and send back to the vendors.

Asst.Design Manager at 2013. FIRST TELECOM INDUSTRIES
  • Saudi Arabia - Riyadh
  • December 2012 to August 2013

•Designing and verification of the footings of tower and BTS shelters.
•Verification of the DAR for the submission of FDED.
•Analysis of the Soil Investigation Report and Selection of Type of Footing Accordingly.
•Analysis and Design Of the BTS Tower With Staad Pro
•Conducting survey of sites through surveyors and dealing with agencies to mitigate the survey problems.
•Soil Investigation Report Analysis and design of foundation based on soil report.
•Purchase of material and its storage in main store.
•Ensure the safety of the people working at site, ensuring and taking safety measures accordingly.
•Inspection of site for FIS and assuring quality control.
•Preparation of monthly progress reports and design section monthly work progress report.
•Supervising the surveyors and guiding to proceed the survey by provisions of combination numbers and other site access facility.
•Preparation of salaries of the staff of the design section.
•Preparation of FDED for STC, Mobily, Zain etc.

PROJECT MANAGEMENT UNIT at Punjab Emergency Service
  • Pakistan - Lahore
  • February 2008 to August 2012

• Technical evaluation of design of structure and approval of same for execution.
• Modification in the scope of work and its implementation with modified design
• Coordination between various areas and disciplines
• Working with engineering drawings and specifications
• Preparing civil works bills of quantities
• Preparation and submission of tenders.
• Testing of concrete and steel as per contract agreement from the approved labs.
• Execution and inspection of the work completed and final approval.
• Alteration made by client and amendment in the design.
• Approval of unexpected change in scope of work and implementation.
• Change in design of footing due to concrete joints in concrete.
• Approval of the architectural and construction drawings with takeoff sheets.
• Sub soil investigation with borehole study and ensure that design is based upon actual bearing capacity of soil.
• Selecting the type of foundation and decision final approval of its dimensions and type.
• Supervise the bar bending schedule and implement it as per design and drawing.
• Design of sewerage and water supply system
• Technical presentations and attended meetings to address technical issues to secure any inconvenience.
• Coordination with the consultants for timely provision of drawings and sheets.
• Provision of job mix design to the contractor to ensure quality concrete.
• Prepare the estimates and tender documents with detailed BOQ and DNIT.
• Monitoring site activities and planning them in consultation with consultant.
• Making plans for the upcoming activities and distribution of works

CIVIL ENGINEER at HAIER PAKISTAN (PVT), LTD
  • Pakistan - Lahore
  • September 2007 to February 2008

•Monitoring the activities in Progress & Identifying the delays.
•Submitting Weekly/Monthly Progress reports to Consultant/Client.
•Attending Weekly Progress review meetings with Client/Consultant, Justifying progress and delays incurred.
•Identifying Updated requirement of Resources as per the schedule & reporting to the Project Manager.
•Preparation of monthly statement.
•Estimating quantities for different structures
•Correspondence with client and Engineer on various Project related issues.
•Fabrication of the buildings for newly construction
•Execution of the reinforced concrete in the foundation
•Ensuring the quality and standards of work.
•Demarcation of the site and its layout
•Calculation of material for site and leveling with surveying with total station
•Studying of drawings and provision of input to the contractor for execution.
•Design of shed for the new plant of Haier factory.
•Subsoil investigation of the soil and design based upon provided soil data.
•Roof treatment using jumbo lawn and foam spray for the heat proofing of factory.
•Input in the selection of the washrooms and kitchenette. With specific design.
•Surveying the area and take the points for leveling and surveying.
•Design of the truss structure and fabrication of steel.
•Approval of the material and concert testing.

Site Engineer at WAJDACOM INTERNATIONAL (PVT) LTD
  • Pakistan - Lahore
  • June 2004 to September 2007

•Over all in charge of the site, with responsibility of managing resources.
•Remain fully aware of activities being carried at site by making frequent visits.
•Identify updated requirement of manpower direct material, direct consumable and equipment
•Generate discipline wise progress and efficiency reports on, weekly and Monthly basis.
•Compare Construction drawings with tender drawings.
•Quality assurance of every activity going on at site.
•Supervision of construction activities at site.
•Timely completion of targets
•Calculation of the material for site as per schedule and management of human resources.
•Ensure all operation at site according to Client Requirements.
•Calculating the load of the Antenna mount prior to installation.
•Preparation of construction drawings of BTS as required by the contractor.
•Ensuring safety standards at site and get the work done in time.
•Discussion of design of BTS Tower with designer for modified design to fit as per requirements.
•Using Auto Cad to use Eagle point for surveying the area.

Education

Master's degree, MSC CIVIL ENGINEERING
  • at UET TAXILA PAKISTAN
  • May 2013

MSC CIVIL ENGINEERING

Bachelor's degree, BSc Civil engineering
  • at University College of Engineering and Technology B
  • September 2004

Academic Qualifications BSC CIVIL ENGINEERING

Bachelor's degree, BSC MATH & PHYSICS
  • at BZU MULATN
  • September 1998

Specialties & Skills

Estimates
Microsoft Office
AutoCAD
Eagle Point
CUSTOMER RELATIONS
QUALITY CONTROL
REQUIREMENTS
CONSULTING
GRAPHIC DESIGN
QUALITY
DOCUMENTATION
MATERIALS MANAGEMENT
MICROSOFT OFFICE SPECIALIST

Languages

Arabic
Expert
English
Expert
Urdu
Expert

Memberships

PAKISTAN ENGINEERING COUNCIL
  • CIVIL ENGINEER
  • October 2007
SAUDI COUNCIL OF ENGINEERSS
  • CIVIL ENGINEER
  • May 2014

Training and Certifications

STAAD PRO (Certificate)
Date Attended:
March 2012

Hobbies

  • design of structures
    staad pro