Structural Design Engineer
Albwardi Engineering Consulting
Total des années d'expérience :15 years, 10 Mois
Job Description & Responsibilities:
I. Preparing structural reports, designs, and drawings for study & design project.
II. Making calculations either manual or by structural software program (ETABS, SAP2000, SAFE, STAAD, SPColumn, Tedds TEKLA) for study & design project.
III. Verify & ensures all loads applied are as per code and as per what is reflected on architectural and MEP plans for study & design project.
IV. Verify & ensures all lateral loads are properly applied in the structural software and making sure that the building structure simulate in realistic behavior during modeling in the software for study & design project.
V. Selecting appropriate Codes to be used like IBC, UBC, ACI 318, AISC, ASCE-7/SEI, SBC and other Engineering and Construction Codes and Standards for study & design project.
VI. Review structural computations for each project submitted by contractor for approval prior to prepare shop drawing plans for all supervision project.
VII. Checking and reviewing shop drawings submitted by contractor for approval prior to execution of plans for all supervision project.
VIII. Inspecting properties to check conditions/boundaries for foundations as per assign by Department Head.
Project Handled Summary;
Study & Design Project;
1. Seven storey ministry of finance building
2. Cargo & Passenger Port for all KSA border
3. Sports & Leisure Clubs
4. Agricultural Development Fund Building
5. General Presidency of the Promotion of Virtue and the Prevention of Vices Building
6. Alrajhi University Apartments
7. Four storey & 2-storey Apartments
8. Private Villas & Masjid
Supervision Project;
1. 625-Units Salwa Housing
2. Almajmah University
3. Zulfi University
4. Northern Border University (Rafha)
5. Halat Ammar Cargo Port
6. Marafiq housing (Yanbu)
Job Description & Responsibilities:
I. Preparing reports, designs and drawings.
II. Review structural computations for each project. Making calculations either manual or by structural software program (ETABS2013, SAFE v12, STAAD Pro V8i, PROKON, EXCEL sheet).
III. Verify & ensures all loads applied are as per code and as per what is reflected on architectural and MEP plans.
IV. Verify & ensures all lateral loads are properly applied in the structural software and making sure that the building structure simulate in realistic behavior during modeling in the software (ETABS/SAFE).
V. Selecting appropriate Codes to be used like IBC, UBC, ACI 318, AISC, ASCE-7/SEI, SBC and other Engineering and Construction Codes and Standards.
VI. Selecting appropriate construction materials & providing technical advice.
VII. Develop Manual Design Calculation in Excel Sheet for Submittal in some small & medium project.
VIII. Inspecting properties to check conditions/boundaries prior for designing foundations as per assign by Senior Engineer.
IX. Investigate existing building for propose extension prior for design.
X. Interpret and explain plans and contract terms to co-staff and workers.
XI. Monitoring and inspecting work undertaken by contractors as per assign by Senior Engineer.
Job Description & Responsibilities:
I. Assign as Field Consultant during the construction of Level-3 Water Treatment Plant Project to serves for the entire City / Municipality in Parang, Maguindanao, Philippines.
Water System Project Composition; Settling Pond/Infiltration Gallery, Water Treatment Plant (WTP), Concrete Reservoir/Tank, Transmission & Distribution pipe line.
II. Make technical recommendation regarding proper execution of the project by giving detail drawing either for structural or Piping during the construction phase.
III. Participate in Conducting Ground Survey for the propose project to determine Elevation, Profile, Stationing, & Topographic during Designing phase.
IV. Participate in Conducting Road survey to identify possible construction & Installation of R.C.B.C/ R.C.P.C. for ease access of Transmission & Distribution Pipe line during Designing phase.
V. Participate in Conducting Soil Exploration to determine soil characteristics & structures for designing of the structure.
VI. Participate in Preparing Structural Designs, Cost Estimate, Program of Works / Scheduling, & Bidding Documents.
VII. Design & Develop Study concerning Water System and other Infrastructures Project such as Public schools & Concrete Water Tanks, etc.
Job Description & Responsibilities:
I. Structural Designing for the propose Infrastructure projects in accordance with the building code & standards (IBC, UBC, ACI318, ASCE7, AISC, SBC).
II. Making calculations either manual or by structural software program (ETABS v9.5, PROKON, EXCEL sheet).
III. Review structural computations for each project. Checks & Ensures all loads are applied.
IV. Selecting appropriate construction materials & providing technical advice.
V. Preparing Structural / Architectural drawings as per assign by Senior Engineer.
VI. Material Take off, preparing material estimates, Bill of quantities (BOQ) as per assign by Senior Engineer.
VII. Investigate existing building for propose extension prior for design.
VIII. Monitor & supervising the project as per assign by Senior Engineer.
Job Description & Responsibilities:
I. Designing of structural and architectural for the propose project such as Public Schools, Mosque, Dormitory, & Quarters In accordance with the building code & standards (NSCP, UBC, ASCE7).
II. Preparing Structural / Architectural drawings as per assign by Senior Engineer.
III. Making calculations either manual or by software program (EXCEL Sheet).
IV. Material Take off, preparing material estimates, Bill of quantities (BOQ) as per assign by Senior Engineer.
V. Monitoring & supervising the project. Implement and adhere w/ QA/QC program, safety guidelines, and specification during the work activities.
President of Philippine Institute of Civil Engineering (PICE) Student's Chapter with Leadership Award
Licensed Electrician
