Muhammad Rauf Uddin, Quality Manager

Muhammad Rauf Uddin

Quality Manager

Saudi Pan Kingdom Company

Location
Saudi Arabia - Jeddah
Education
Bachelor's degree, Civil Engineering
Experience
18 years, 4 Months

Share My Profile

Block User


Work Experience

Total years of experience :18 years, 4 Months

Quality Manager at Saudi Pan Kingdom Company
  • Saudi Arabia - Jeddah
  • My current job since January 2023

Project Name: Al-Arous Infrastructure Works (North Jeddah), Jeddah

Project Briefs: Project comprises of approximately all types of infrastructure works, i.e. Sewer Network with lifting station, Storm Network, Potable Water Network, Irrigation Network with pump station, Roads and Paving Works, Electricity Works (HV, MV and LV) including Substations, Street Lighting Works and Telecommunication Works.

Responsibilities:
• Ensure the effective implementation of the Quality Management Systems on projects and report on system performance.
• Rest of the work is similar to previous project

QA/QC Manager at Thabat Construction Company Ltd
  • Saudi Arabia - Jeddah
  • April 2021 to December 2022

Project Name: Red Sea Village Development (RSV) Infrastructure Works - TP4, Jeddah

Project Briefs: Project comprises of all infrastructure works (Roads and Utilities), mainly Earthworks, Roads and Paving including Traffic Signal Junctions, Potable Water Works, Electricity Works including Substations, Drainage Works, Sewer Works, Irrigation Works, Street Lighting Works and Telecommunication Works.

Responsibilities:
• Develop project’s quality assurance and quality control plan.
• Responsible for overall project's Quality management system, Quality assurance process, and Quality control procedures.
• Maintain and Control QA/QC practices through Inspection and Testing Plans on daily basis with regular check & inspections through team.
• Maintain all the specification, quality manuals and documents.
• Arrange, manage and record all testing results.
• Observe laboratory testing to ensure that internal Quality Control met the project needs.
• Ensure the effective implementation of the Quality Management Systems on projects and report on system performance.
• Take part in all internal, external and client’s meeting.

QA/QC Manager at Thabat Construction Company Ltd.
  • Saudi Arabia - Jeddah
  • September 2019 to April 2021

Project Name: Construction of New Pipeline from P3 to Al Khumra District - Package: P3A, Jeddah

Project Briefs: Supply and install of 10.18km of water mains including all related systems and diameter varying between 400mm and 1400mm including thrust boring works.

Responsibilities:
• Manage and oversee project quality to ensure compliance to codes, standards, regulations and client’s Project Management Framework and fulfills Thabat’s IMS and QMS requirements.
• Take Lead to internal and external audits within the company and by the client respectively.
• Ensures both quality of processes and product of the project through project Quality Management Plan.
• Implement client’s project management framework (PMF) throughout the project and makes sure the latest governance documents are implemented and communicated to client.

QA/QC Manager at Thabat Construction Company Ltd.
  • Saudi Arabia - Mecca
  • November 2018 to August 2019

Project Name: Execution of Strategic Water Line at 4th Ring Road, 20C, Makkah

Project Briefs: Design, procure and built of 12.0km strategic water mains of diameter varying between 1200mm and 1600mm including thrust boring works.

Responsibilities:
• Managing the development and implementation of the QMS for inspection and documentation activities including
- Planning duties within the QA/QC staff and related work schedules;
- Identifying and developing QA/QC personnel certification requirements and continuing education/training needs;
- Providing leadership, mentorship, and direction of all QA/QC personnel.
• Implement client’s project management framework (PMF) throughout the project along with Project Quality Management Plan.

QA/QC Manager at Thabat Construction Company Ltd.
  • Saudi Arabia - Jeddah
  • May 2015 to October 2018

Project Name: Execution of Main Lines for Sewage Network - P4F, Jeddah

Project Briefs: Designed, procured and built 10.2km sewer mains using micro-tunneling (thrust boring) for gravity flow system to transfer sewage water. It included 48 shafts up to 22meters in depth.

Responsibilities:
• Preparation, approval and implemented Project Quality Plan (PQP) and Inspection Schedule (IS)
• Implementation of client’s inspection checklists
• Taking part in material submittals and approvals (MAT), prequalification of sub-contractors and third-party testing laboratory
• Handling and tracking material inspection requests (MIRs)
• Preparation, inspections, scheduling and tracking for approvals for Work Inspection Request (WIRs)
• Obtaining test reports including concrete crushing Reports and others
• Closing non-conformance reports (NCR)
• Resolving quality issues on site
• Permit to work - start to closure
• Successfully lead internal and external audits with maximum success rate.

Senior Technical Engineer at Al-Muhaidib Contracting Company
  • Saudi Arabia - Jeddah
  • June 2013 to April 2015

Project Name: Briman Strategic Water Reservoirs Project, Jeddah, Saudi Arabia

Project Briefs: The Strategic water project consisted of 11 reinforced concrete tanks with each capacity of 187, 500 cubic meters, GRP pipe network with diameters between 1500mm and 2600mm and a total length of 6km, Administrative and Chlorination buildings and around 100 chambers.

Responsibilities:
• Accurate processing of submittals to ensure all the products and materials on site are correct and as per client’s specification and standards.
• Extensive site inspections to mitigate any comments from client’s representative
• Key role in water pressure, leakage test and repair work on base slab and wall and implemented remedial works to minimize or stop leakages
• Played a key role in providing solutions to technical queries, field change notices, construction method statements, blasting for excavation and leading the as-built drawing stage
• Solve structural designing/detailing issues on site.
• Preparation of snag/punch list at the time of handing over
• Closing non-conformance reports (NCR)

Technical Office Engineer at Al-Muhaidib Six Construct Company
  • Saudi Arabia - Jeddah
  • November 2012 to May 2013

PROJECT: King Abdullah Sports City (EPC Project)
PROJECT COST: € 384, 000, 000

ENGINEERING AND CONSTRUCTION MANAGEMENT:
• Coordinating with technical engineers regarding design related issues, site requirement and modifying the error in the drawings to incorporate field change notices (FCNS)
• Coordinating with the client, consultant engineers at office and site level to maintain the smooth progress and controlling the sub-contractors to achieve the progress as per the project schedule
• Attending the weekly progress meeting with project management team and arranging the regular meeting with sub-contractor to speed the progress
• Giving instruction to the site superintendent for operation related works
• Maintaining the mail correspondence with client, departments, sub-contractor and suppliers for quick & easy action
• Controlling the reinforcing steel on complete project, sending weekly report to the client, management and consultant
• Forward the weekly steel progress schedule to the civil structure coordinators to get the steel without interruption

Assistant Manager - Technical at National Industrial Parks Development and Management Company
  • Pakistan - Karachi
  • February 2012 to November 2012

PROJECTS:
Korangi Creek Industrial Park, Karachi
Bin Qasim Industrial Park, Karachi
Rachna Industrial Park, Punjab
Sargodha Industrial Park, Punjab

TENDERING, CONTRACTS, EVALUATION AND ENGINEERING:
• Monitor and evaluate all projects activities using various aids and update Technical Departments of Owner, Consultants and Contractors on the status of different jobs
• Keep the projects align with policies, procedures, guidelines, time and schedules along with recommended remedial actions
• Conduct research and advise on updating policies and procedures manual
• Undertake appropriate investigations at the time of initiation of new activity and communicate on project
• To prepare tender notice and finalize tender documents in coordination with Owner and Consultants
• Evaluation of consultants/contractors for various works/projects based on the pre-defined criteria
• Preparing and finalizing bid evaluation
• Took part in pre-qualifications of consultants and contractors
• Reviewing all concrete and structural drawings in coordination with consultants

Senior Engineer at LOGIX - Project Managers, Consultants & Advisors
  • Pakistan - Karachi
  • November 2011 to February 2012

Project:
======
Khairpur Special Economic Zone (KSEZ), Khairpur
SRSO Complex, Sukkur
Re-Construction of Roof Water Drainage at Finance & Trade Centre, Karachi
Ahlul Bait Public School, Bozdar Wada
Eid-Gah Al-Hussaini, Hangu

Client: SRSO, Hussaini Foundation

Responsibilities as Senior Engineer:
============================
• To make good correspondence between client, principal architect, structural consultants and the contractor
• Resolving design and site issues, arranging meetings and participate in both design and execution work
• Prepare architectural and structural drawings and details of building structures for clients
• Preparation of design criteria, site reports and design calculations for building structures

Structural Engineer at Engineering Consultants International (Pvt.) Ltd.
  • Pakistan - Karachi
  • September 2007 to October 2011

Project:
======
Zero Point Interchange, Islamabad
Avari Islamabad Hotel (G+23), Islamabad
Sindh Irrigation Flood Damages Restoration Project
Lining of Distributaries and Minors in Sindh Province

Client: Capital Development Authority, Avari Group

Responsibilities as Structural Engineer:
==============================
• Designing and detailing of super and sub-structures including steel gates of head regulators (bridge structures having steel gates to control flow of water) for flood damaged structures
• Designing of steel vertical & radial gates using technical software and developed excel sheets
• Designing of substructures of bridges including abutments, piers, piles, pile caps and retaining structures
• Designing of culverts, bearing walls, outlets and other related things
• Detailing of bridge structures
• Preparation of structural drawings as well as take part in preparation of bidding drawings which contains plan & profiles of lining area and their cross sections
• Finalization of design and bidding drawings by checking and forwarding to the client
• Some minor vetting projects as well as took part in building designing
• Designing and detailing of site residential structures
• Preparation of design criteria, site reports and design calculations reports of head and cross regulators, vertical and radial steel gates, and site residence
• To solve design issues at Avari Islamabad hotel site
• To co-ordinate design-site issues with the designers
• To look after the changes made on site and preparation of revised drawings if changes are made

Lecturer (Visiting Faculty) - Part Time at NED University of Engineering and Technology
  • Pakistan - Karachi
  • March 2010 to September 2010

Designation: Lecturer (Visiting Faculty)
Department: Urban Engineering
Course: Class of Civil Works Quantity and Cost Estimation (3rd Year Urban Engineering)

Design Engineer at Associated Consultancy Cerntre (Pvt.) Ltd.
  • Pakistan - Islamabad
  • July 2006 to August 2007

Project:
======
Sindh Road Sector Development Project
NWFP Road Sector Development Project
Balochistan Road Sector Development Project
National Highway Authority Projects
Azad Jammu and Kashmir Projects

Client:
=====
National Highway Authority,
C & W, Sindh, NWFP, Balochistan, AJK

Responsibilities as Design Engineer:
============================
• Modeling for the analysis of load on bridge deck using SAP2000 and STAAD.Pro
• Analysis of pre-stressed forces and extreme fiber stresses in girder and calculation of losses for different types of girders
• Analysis, designing and detailing of sub structures like box culverts, slab culverts and pipe culverts
• Analysis, designing and detailing of retaining structures like masonry retaining walls, cantilever retaining walls and counter fort retaining walls
• Checking the details of bridge drawing
• Modeling as well as designing of frame structures using professional software ETABS
• Designing and detailing of R.C.C structures
• Basement walls designing and detailing
• Preparation of excel sheets for analysis and designing purposes
• Checking the details of building drawing

Junior Design Engineer at Exponent Engineers (Pvt.) Ltd.
  • Pakistan - Karachi
  • December 2005 to July 2006

Project:
======
Jehlum Valley Bridge Designing with JICA
Ufone Sites, Frame Structures Designing
Siemens Sites, Frame Structures Designing
Retaining walls etc

Client:
=====
JICA, Telenor, Ufone

Responsibilities as Junior Design Engineer:
=================================
• Analysis of truck and track loads on bridge deck and box culverts using STAAD.PRO
• Preparation of excel sheet for the analysis of seismic loads on abutment
• Pre-stressing and losses calculations
• Masonry retaining walls etc
• Checking the details of bridge drawing
• Modeling and analyzing of frame structures using professional software, ETABS
• Designing and detailing of R.C.C structures
• Preparation of excel sheets for analysis and designing purposes

Education

Bachelor's degree, Civil Engineering
  • at NED University of Engineering and Technology
  • December 2005

B.E (Civil Engineering)

Bayt Tests

IQ Test
IQ Test
Score 68%

Specialties & Skills

Auditing
ISO 9001 2015 Documentation
Quality Management Systems QMS
Construction Management
Project Management
Project Management
Construction Management
Quality Management
Customer Focus
ISO 9001:2015 related Audits
Integrated Management System
Leadership

Social Profiles

Personal Website
Personal Website

URL removed due to policy violation. Please contact support for further information.

Languages

English
Expert
Urdu
Native Speaker
Arabic
Beginner

Memberships

Pakistan Engineering Council
  • Registered Engineer
  • August 2007
Saudi Council of Engineers
  • Engineer
  • January 2016

Training and Certifications

ISO 9001-2015 Quality Management System Implementation & Audit (Training)
Training Institute:
EL MAQTBA
Date Attended:
March 2021
Duration:
4 hours
Seven Quality Control (QC) Tools & 8th Tool (+ Excel Tools) (Training)
Training Institute:
SeaportAi
Date Attended:
July 2021
Duration:
1 hour
Quality Management for Business Excellence (Training)
Training Institute:
Quality Gurus Inc.
Date Attended:
October 2021
Duration:
3 hours
Project Risk Management Procedure (Training)
Training Institute:
Thabat Construction Company Ltd. (In-House)
Date Attended:
September 2022
Duration:
4 hours
Engineering Project Management: Risk, Quality, Team, and Procurement (Training)
Training Institute:
Rice University
Date Attended:
August 2021
Duration:
15 hours
Building Information Modeling in AEC Industry of Pakistan (Certificate)
Date Attended:
June 2012
Valid Until:
June 2012
Computer Aided Project Management with MS Project 2010 (Certificate)
Date Attended:
July 2012
Valid Until:
July 2012
PPRA Rules (Certificate)
Date Attended:
June 2012
Valid Until:
June 2012
AutoDesk AutoCAD (Certificate)
Date Attended:
April 2005
Valid Until:
July 2005

Hobbies

  • Group Outing and Exploring New Places
    In Saudi Arabia, I have explored the oldest cities here like Khayber, Al Ula, Madain Saleh, Jabl-e-Uhad, Taif. Planning to Explore Abha and Tabouk soon.