Sunil K Somanathan

Mechanical Quantity Surveyor في Samsung C&T Corporation Ltd

• المملكة العربية السعودية - الرياض
• أشغل هذه الوظيفة منذ مايو 2017

 Preparation of Sub-contracts for Cladding, Cross
Fit-out area works etc.
 Works required as per the requirements of MEP
dept. by time to time
 Documentation of drawings & other details in
soft & hard copy state.

Mechanical Quantity Surveyor في Samsung C&T Corporation Ltd

• المملكة العربية السعودية - الرياض
• نوفمبر 2014 إلى مايو 2017

 Preparation of Sub-contracts for Cladding, Cross
Fit-out area works etc.
 Works required as per the requirements of MEP
dept. by time to time
 Documentation of drawings & other details in
soft & hard copy state.

CADD Designer في UEM Inc. Ltd., Florida, United States Of America, West Palm Beach, Florida, USA

• الولايات المتحدة - فلوريدا
• يناير 2013 إلى يوليو 2013

 Checking for clashes of Plant CSD Dwgs in
Navisworks / AutoCADD peripherals.
 Weekly MEP Progress preparation.
 Presenting the current clashes & problems with
solutions collected to represent it in by-weekly
Progress meeting.
 Documentation of drawings & other details in
soft & hard copy state.

Mechanical Draughtsman في Sung-Chang Engg. & Construction Ltd, Abudhabi, UAE

• الإمارات العربية المتحدة - أبو ظبي
• فبراير 2012 إلى يناير 2013

 Weekly Mechanical Progress preparation /
Weekly Equipment Updates for Weekly Meeting,
internal & external purposes.
 Alteration of drawings to be changed.
 Working on Spoolgen software to work spooling
of site required pipes
 Documentation of drawings & other details in
soft & hard copy state

Mechanical Draughtsman في Nesma & Partners Cont. Co. Ltd, Al-Khobar, KSA, Riyadh, Saudi Arabia

• المملكة العربية السعودية - الرياض
• أبريل 2010 إلى يوليو 2011

 Designing & Drafting of Air-conditioning systems,
Plumbing & Fire Fighting Piping network and
preparation of Shop Dwgs & MEP Co-ordination
Dwgs.
 Documentation part of drawings other details in
soft & hard copy state

Mechanical Draughtsman في Nesma & Partners Cont. Co. Ltd

• المملكة العربية السعودية - الخبر
• نوفمبر 2008 إلى ديسمبر 2009

 Designing & Drafting of Air-conditioning systems,
Plumbing & Fire Fighting Piping network and
preparation of Shop Dwgs & MEP Co-ordination
Dwgs.
 Reviewing the Duct & Pipe size as per required
flow and resize both as per standards.
 Effectively handled preparation of final BOQ as
per approved final shop dwgs and approved
submittals.
 Documentation part of drawings other details in
soft & hard copy state

Mechanical Draughtsman في Nesma & Partners Cont. Co. Ltd, Al-Khobar, KSA, Rabigh, Jedaah, Saudi Arabia

• المملكة العربية السعودية - رابغ
• أغسطس 2006 إلى أغسطس 2008

 Preparation of General Arrangement Dwgs.
 Preparation of As-built UG/AG Piping Isometric
Dwgs using AutoCADD.
 Familiar with Saudi Aramco CADD &
Micro-station Standards.
 Familiar with Conversion of AutoCAD Dwgs to
Micro-station for As-Built final submission.
 Preparation of Isometric including the details of
design information, specification, radiography,
welding codes, painting spec, Material
specification etc.
 Preparation of Material Take-Off, Weld Mapping
and Spooling of Piping Isometric Drawings.
 Coding and documenting the drawings as per
project needs.
 Systematic Documentation of Drawings and all
other engineering related documents.

Sr. Mechanical Draftsman في Atul Bhalla & Associates

• الهند - دلهي
• ديسمبر 2004 إلى يوليو 2006

 The owner is a Retired Engineers India Ltd.
Mechanical Engineer & Consultant and working
on Various projects like Furnaces & Heaters,
Water Treatment Plants, Bio-gas Projects etc.
 Worked on STAAD peripherals for deriving the
Calculations & Load Data of Furnaces &
Heaters. (Projects of M/s. Coen Bharat of
Mumbai & M/s. Furnace Improvements
Systems of Texas, USA)
 Detailed Drawing preparation for the Furnaces
& Heaters.
 Preparation of Bill of Quantity for Steel & Piping
Material Take off for the Structural Analysis
purposes and various purposes in respect to the
standards.
 Alteration drawings for various upcoming
projects on Furnaces & Heaters revamping
works.
 Final Q.A. checking of the Drawings & Load
Data of STADD Analysis before uploading the
Soft-copies to the Client.

CADD Engineer في Amitex Polymers Pvt. Ltd

• الهند - دلهي
• سبتمبر 2001 إلى مايو 2004

 The Company is the Manufacturers of PP-R
Pipes & Fittings Collaborated with M/s. UPONOR,
Poland - The Giant manufacturers of PPR Pipes.
 Detailed Drawing preparation as per industrial
requirements.
 Preparation of Piping Material Take off various
purposes in respect to the industrial standards.

Design Draughtsman في Freeze King Industries Pvt. Ltd

• الهند - دلهي
• أغسطس 1998 إلى أغسطس 2001

· Making Assembly Drawings of Compressors &
Machines.
· Making Working Drawings of Compressor Parts.
· Maintaining Progress charts of production as per
schedule, on regular basis.

• يناير 1998 إلى أغسطس 1998