project electrical engineer
Fire PRO ONE Safety
Total years of experience :14 years, 6 Months
Projects:
➢ ADNOC ABU DHABI - RUWAIS HOUSING COMPLEX PHASE II MEP works, Main duct work, Fire Fighting and Fire alarm system installation
Duties and Responsibilities:
• Hand on participate of operating and maintaining emergency lighting systems, fire alarm and life safety systems, ICT, security systems and other ELV systems includes layouts, schematics, calculations, reports and specification from scheme to tender design.
• Revit and CAD proficient with fire protection drawings.
• Apply engineering principles and fundamentals of fire protection design including but not limited to fire pump calculations, pipe sizing, gas suppression, deluge, pre-action systems and high-rise design.
• Apply risk management procedures daily to minimize client’s exposure to problems through understanding of many NFPA code sections, and variations from year to year.
• Carry on Inspection, Maintenance, Rectification, Installation of Addressable & Conventional fire Alarm & Emergency light System, Gas detection system, firefighting system & Fire suppression System and Fire Pumps.
• Critically evaluate contractor pricing and cost estimates.
• Perform front-end loading of fire protection systems for projects with project managers.
• Attend design team meetings and provide the correct and reasonable interpretation without extensive research.
• QC reviews of all calculations and correspondence by designers, and provide guidance and mentoring.
• Contributes revisions of standards and master specifications.
Projects:
• Construction and Completion Civil Protection and Safety Administration
• Construction of IT and Communication Administration, Whorehouse of Chemical materials and Restrooms of Electricians
• General Maintenance of Department of Residence & Foreigners Affairs, Al Ain
• Participated in review of electrical equipment such as switchgear, transformers, AC/DC UPS, electric motors, starters, VFD, VSD, MCC and stand-by generators.
• Supervised all MEP work to be as per approved shop drawing and within the time frame and progress of the approved construction program.
• Ensure that the installation, inspection and testing of all the MEP equipment, fittings and work implemented meets the specification and the consultant requirements.
• Carrying out detail design, sizing, calculation (cables, conduits, trays, trunking TCLs, Max-Demand, Kwh metering, Power Factor (PF) Correction, drop voltage).
• Verify the accuracy of shop drawings and their compliance to the specification, consultant’s design and existing local authority standard.
• Liaise with local authorities (FEWA, Civil Defense, Etisalat, etc.) for the approval of MEP services drawings and service connection.
• Prepare shop drawing and material submittals for consultant’s approval.
• Designing maintenance strategies, procedures and methods.
• Carrying out routine scheduled maintenance work and responding to equipment faults.
• Diagnosing breakdown problems.
• Monitoring and controlling maintenance costs.
• Dealing with emergencies, unplanned problems and repairs.
Projects:
➢ Reem Island - Sector RT2 and RT3 Infrastructure- Abu Dhabi Traffic Lights Systems, Street Lighting Works, Power Works
Client: Al Tamouh Investment Company LLC
Consultant: M/s Hyder Consulting Engineers
Duties and Responsibilities:
• Prepares specifications, plans, estimates and reports pertaining to the construction, maintenance and operation of traffic engineering facilities and street lighting systems.
• Applying Street lighting, Traffic lighting standards, codes (CIE 115, CIE88)
• Reviewing street lighting design, software and construction.
• liaising with local authorities and agencies.
• Make sure that any non-conformity has been reported through a Non-Conformance Report (NCR), reviewed by his line supervisor.
• Review the tests and reports required to street lighting and ensure that they conform to the specifications
• Submission & Review of Engineering deliverables drawings, material submittals, quality plan etc.as per project specification.
• Make sure that any activity offered for his inspection has an approved shop drawing, method statement (MS), Quality Control Procedure (QCP) and Inspection & Test Plan (ITP).
• Review the tests and reports required to light the streets (LM79, 80, 82, 84, 85 etc.) and ensure that they conform to the specifications
• Coordination of onsite activities including Installation, Testing & Commissioning Inspections and Material Inspections etc.
Projects:
➢ Project: Expansion, implementation and Maintenance for wedding halls
Owner: Court of His Highness the Crown Prince
Consultant: Al Ain Consultant Engineering
Location: SWEIHAN - land No. 44
➢ Project: MEP Maintenance Works for 25 Schools
Owner: Abu Dhabi Education Council
Consultant: MUSANADA General Services
1. Estimation, Quotation, LPO preparation, price negotiation
2. Liaising with clients, suppliers, contractors and relevant authorities.
3. Monitoring and recording inspections, tests, work executed etc.
4. Reading PID & Engineering Drawings.
5. Supervising electrical jobs based on shop drawings and specifications.
6. Checking material delivered are as submitted approved and properly stored.
8. Reporting maintenance statistics, outage and breakdown details to Management.
9. Committed to work in project deadlines and schedules.
10. Ensuring implementation of all technical and safety requirements and verification of commercial issues, guiding, coordinating and reporting progress of works.
11. Ensures compliance with required design and drafting standards and specifications.
12. Create and document Job Hazard Analysis’s (JHA’s) - includes cold work, hot work, breaking containment, confined work etc.
13. Preparing weekly and monthly progress reports and assesses them against the project schedule.
14. Ensuring work is executed according to contract specifications, approved design drawings, agreed procedures, and method statements.
15. Negotiating with client and consultant for obtaining approvals for requested modifications.
16. Supervision of the bids offered and do calculates the quantities and pricing (a subsidiary of tenders MUSANADA General Services).
1. Creates basic P&IDs and Instrumentation diagrams etc. from rough sketches and/or from general engineering and design information according to established standards and procedures.
2. Providing the specifications and engineering documents which detail all engineering aspects for the project execution and instrument/system configuration, programming, commissioning and integration.
3. Create, submit, review, change and approve engineering documentation (e.g. wiring diagrams, setting list, etc.)
4. Calculation of material requirements and technical specifications in accordance with local and
international norms and standards
5. Technical description of the processes, system description (Functional Design Specification,
Bill of Material)
6. Plant documentation (P&ID, I/O wiring, electrical schematics, etc.)
7. Hardware and Software component specification
8. Configuration and dimensioning of instrumentation and control equipment
9. PLC, Robot & HMI programming, implementation and troubleshooting.
10. PLCs/RTUs, Robotic & SCADA Digital Electronics, Microprocessor & Microcontroller Computer architecture (servicing and network)
11. Automation Engineering Siemens (S7-300/400/1200/1500) Programming and Application.
12. Electrical LV and MV switchboards and reticulation systems
13. Interpret and navigate through control system logic diagrams and codes.
14. Daily supervision, execution and monitoring of electrical works.
BS in Electrical Engineering ( 2008 - 2012 ) Competence to Computers and Automatic Control Faculty of Mechanical & Electrical Engineering Electrical/electronic/software engineer with knowledge of industrial automation systems operation & maintenance of control systems, PLCs/RTUs, Robots and safety systems Experience with PLCs, Robots, Networks, IT & PC systems and instrumentation.